Filter
Top Products
2 PELCO Manual C498M-A (9/95)
3.0 DESCRIPTION
The TS Series tamper switch kits are designed for use
in the HS Series of enclosures. The TS1000 is designed
for use in the HS1000 Series, the TS6000 for use in the
HS6000 Series, and the TS4000 is a generic switch kit
for use in many of the high security enclosures as noted
below).
The tamper switch can be used for both “Normally
Open” or “Normally Closed” circuits, and features a
“Pull-Out” plunger that makes disconnection, while
servicing equipment, unnecessary. The plunger also
features an adjustment screw.
3.1 MODELS
TS1000 Tamper switch kit for HS1000.
Has N.O./N.C. contact with mount
bracket.
TS4000 Tamper switch kit for HS1500,
HS2000, HS3000, HS4000,
HS4000TW Series, HS4100BF,
HS4100BH, HS8000 and HS9000.
TS6000 Tamper switch kit for HS6000.
4.0 SPECIFICATIONS
MECHANICAL
Switch: Plunger type with .20" travel 6-32 x
1/2" adjustment screw
Wire leads: 12", #22 gauge
Black — Common
White — Normally Open
Red — Normally Closed
100 V, maximum switching voltage
25 amp, maximum switching
current
Temp. range: -66° to 212°F (18.9° to 100° C)
Impact: Withstands 2-inch diameter steel
ball from 30-inch drop
Shock: 50 G’s at 11 milliseconds
Vibration: 35 G’s at 54-2000 Hz
Bracket: Galvanized steel .047" thick
Double-sided tape for mounting
(Specificaions subject to change
without notice.)