Filter
Top Products
Chinese Expert
6-8
8. Settings: provide Recognition Setting, General, Property, Translation Website Set up and
Interface Language settings.
9. Minimize: click to minimize the toolbar to Taskbar.
10.Click
to minimize the toolbar into a tray icon. Double-click the tray icon on the
bottom-right of the screen to open the toolbar. Right-click to open the function menu.
6.5.2 Scanning & Recognizing
1. Select [Scan & Recognize] from [Scan Mode] .
2. Select the language of the text that you would like to scan from [Recognition Language].
3. Open any word processor (i.e Microsoft Word or Wordpad) and click the location where
you would like the WorldPenScan to start.
4. Place a document on a at surface and place the scanner tip at the start of your desired
scan area. Aim the arrow at the desired area, then press and drag the WorldPenScan pen in
a straight line across the area. During the scanning, please make sure the white auxiliary
light is on. Stop applying pressure to the pen to stop scanning. The scanned text will dis-
play in your word processor.
Note: Penpower WorldPenScan is able to scan and recognize one row of characters at a
time. Place the pen so the Scan Tip arrow points at the center of the line.
6.5.3 Sending Images
1. Select [Send Image] from [Scan Mode] .
2. Open a word processor that is able to display images (i.e Microsoft Word) and click the
location that you would like to display the scanned images.
3. Place a document on the table and place the scanner head at the starting word or picture
and aim the Scan Tip arrow at the center of the scan area, the press and drag the World-
PenScan pen in a straight line. The white auxiliary light from the Scan Tip indicates the
pen is scanning. The scanned picture will display on your word processor in an image
format.