Filter
Top Products
Event Logs
58
* Link X up at Y baud
Generated when frame relay link is established.
* Link X up to <remote site alias>
Generated when a WAN link connection to the specified remote site comes up.
* Local DNS server added to firewall
The IP address of the Local DNS server added to the table of services available through the firewall.
* Local DNS server removed from firewall
The IP address of the Local DNS server removed from the table of services available through the firewall.
* Main Battery is bad
The main battery power for memory backup has dropped below operating level, replace the batteries (see Installation
and Applications Manual, Appendix D.
* Main power supply (+5V) has gone bad or been unplugged
The main power supply has dropped below operating level.
* Main power supply (+12V) has gone bad or been unplugged
The main power supply has dropped below operating level.
* Main power supply (+5V) is just up
The main power supply (+5V) has switched into operation within the past minute. This indicates that the main power
supply has taken over from the backup power supply.
* Main power supply (+12V) is just up
The main power (+12V) supply has switched into operation within the past minute. This indicates that the main
power supply has taken over from the backup power supply.
* NAT UDP flooding – Possible security risk. Src is <IP address>
Generated when more than the allowed maximum number of UDP entries has been attempted. This feature is in
place to prevent denial of service attacks. The source IP address of the UDP datagrams is displayed.
* NAT table full
Generated when no more ports are available for Network Address Translation.
* No available remote site for learned DLCI
Generated when, during Frame Relay Auto-learning, the remote site table is filled, no space is available to create
another entry. The user must manually edit the table to remove some remote site profiles before another entry can be
made.