Filter
Top Products
SPEED Serial Adaptors User guide
SCO UnixWare/SCO OpenServer 6
Page 103
UX: sh (sh): ERROR: telinit: Not
found
(Note this error occurs on UnixWare
2 systems only)
telinit command not found None. The installation process takes care of
configuring the kernel and ensures that
SPEED ports are ready for use when the
installation process is complete.
Unable to open device /dev/spd : No
such device
No SPEED cards installed
during driver installation.
1. Install cards. See page 69.
Note that there is no need to uninstall
and re-install the driver. When the
system is rebooted, your SPEED cards
will be detected and configured into the
kernel.
Error message Reason Action required