Filter
Top Products
103
Serial Port Profiles
VModem Phone Number Entry
Create an entry in the Phone Number to Host Mapping window.
Configure the following parameters:
Control Signal I/O Profile
Overview
The Control Signal I/O profile is only available on IOLAN I/O models. When you configure a serial
port for
Control Signal I/O, you are using the DSR, DCD, CTS, DTR, and RTS serial pins for I/O
channel Digital Input (DSR, DCD, and CTS) or Digital Output (DTR and RTS).
Functionality
The Control Signal I/O profile enables the use of the EIA-232 serial port pins to be used as assigned
Digital Inputs or Digital Outputs.
Phone Number Specify the phone number your modem application sends to the modem. Note:
The IOLAN does not validate the phone number, so it must be entered in the
exact way the application will send it. For example, if you enter 555-1212 in
this table and the application sends 5551212, the IOLAN will not match the
two numbers.
Host IP Address Specify the IP address of the IOLAN that is receiving the virtual modem
connection.
TCP Port Specify the TCP Port on the IOLAN that is set to receive the virtual modem
connection.
Default: 0