Filter
Top Products
109
Serial Port Profiles
Modbus Slave IP Settings Field Descriptions
This window is used to configure the Modbus Slaves.
The following buttons are available:
Adding/Editing Modbus Slave IP Settings
Configure the following parameters:
Add Button Adds an entry into the Modbus Destination Slave IP Settings table.
Edit Button Edits an entry in the Modbus Destination Slave IP Settings table.
Delete Button Deletes an entry from the Modbus Destination Slave IP Settings table.
UID Start When Destination is set to Host and you have sequential Modbus Slave IP
addresses (for example, 10.10.10.1, 10.10.10.2, 10.10.10.3, etc.), you can
specify a UID range and the IOLAN will automatically increment the last digit
of the configured IP address. Therefore, you can specify a UID range of 1-100,
and the IOLAN will route Master Modbus messages to all Modbus Slaves with
IP addresses of 10.10.10.1 - 10.10.10.100.
Range: 1-247
Default: 0 (zero)