Filter
Top Products
Perle S- 10G Media Converter Installation Guide
2
Overview
This document contains instructions necessary for the installation
and operation of the Perle S-10G Standalone Media Converters.
The Perle S-10G Standalone Media Converters are 10 Gigabit
Media Converters with two pluggable transceiver ports. The S-10G
supports low power transceivers, whereas the S-10G-XTSH and
the S10G- XTXH support high power (power level 4) transceivers.
Note: The S-10G Media Converter must be populated with two 1G
fiber/copper modules to operate at 1G.
Note2: When used with 1G modules, the S-10G does not support
the Loopback Auto Detect feature.
Visit Perle’s web site for the most up to date Installation guides,
models and specifications:
http://www.perle.com/
Getting to know your S-10G Media
Converter
Your S-10G Media Converter consists of the following items:
• S-10G chassis with two pluggable transceiver ports
• Grounding screws (for improved chassis grounding)
• Country specific power adapter
• Power cord strain relief clip
• Four rubber feet
• This guide
Model Port 1 Port 2
S-10G-STS SFP+ SFP+
S-10G-XTS XFP SFP+
S-10G-XTSH XFP SFP+
S-10G-XTX XFP XFP
S-10G-XTXH XFP XFP