Filter
Top Products
Perle PoE/PoE+ 10/100 Ethernet Media Converter
Installation Guide
11
Half Duplex: The media converter will be set to Half Duplex
mode.
Auto/MDIX (Switch 4)
Switch Position Copper port
Up (default) Auto
Down MDIX
Auto: In the Up switch position; the media converter will
automatically detect the Ethernet cable’s polarity.
MDIX: The S-110P will operate as a MDIX device.
Installing the SFP Fiber Module
SFP models only.
1. Locate the appropriate fiber module and insert the SFP into
the opening on the front of the media converter.
2. Ensure the SFP module is properly seated. The release latch
of the SPF fiber transceiver must be in the closed (up) position
before insertion.
3. The SFP module may be inserted before or after applying
power to the media converter.
4. Proceed with cable connections.
Installing the Duplex Fiber Cable
Locate a 100Base-X compliant duplex (2 strands) fiber cable with
appropriate connectors.
Connect the fiber cables from one media converter to the other
media converter/switch/fiber device ensuring that the RX and TX
are reversed (crossed) at the opposite end.