Filter
Top Products
A470 Users Guide
Pertech® 2006
6
471X Paper Loading Instructions
1. Raise cover
and remove the
spent roll. Flip
the green paper
loading chute
to the raised
position.
2. Install the new
roll so the paper
exits from the
bottom of the roll.
3. Insert the
leading edge of
the paper into
the green loading
chute.
4. Press and hold
downward on the
green paper loading
button ...
5. ... Until one
foot of paper
exits from the
mechanism
6. Flip the green
paper loading chute
to the lowered
position.
8. Fold and insert
the leading edge of
the back ply into the
rewind spool slot.
Rotate as shown to
wind up slack.
7. Separate the
paper plies if
more than one ply
is used.
10. Insert the
receipt ply through
the receipt slot and
lower the cover.
9. Replace the
rewind spool in
the printer and
snap into place.