Filter
Top Products
Frequently Asked Questions
● Check that the cable is attached correctly to the computer.
● Press any key on the keyboard to wake-up the computer from power saving mode.
44. Why is there no picture on my monitor even though the power LED is green?
● Verify the Contrast and Brightness setting of the monitor. First press and hold the 5 (-) button to
increase Contrast and then press and hold the
4 (+) button to increase Brightness. These
buttons are located on the front of your monitor.
● Press both the 5(-) button and the OK button at the same time to switch input A|B.
● Try and repeat step 48 above.
45. Why does the picture disappear after I press the on/off button quickly?
This is a unique Philips feature designed to preserve the life of your monitor. Please allow 5 seconds
between powering off and on your monitor, your picture will then be restored.
file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (13 of 13)2005-04-08 ¤W¤È 11:21:37