Filter
Top Products
Mounting
The display can be placed on a table stand or wall-mounted. The table stand is
supplied as standard; the mounting bracket can be purchased separately. This
bracket can also be used as an adapter in combination with universal wall
supports, ceiling supports or universal floor stands (e.g. Vogel’s Professional).
Fitting the table stand
Only use the stand supplied with the set, making sure that the fasteners are
properly tightened. Never use a makeshift stand, or legs fixed using wood screws.
Using the mounting bracket
The standard VESA mount holes on the mounting bracket allow the user to install
the Philips 3D display on any VESA MIS-E compatible wall support, ceiling
support or floor stand.
Important: Use a VESA MIS-E compatible support suitable for the weight of this
3D Display.
Always secure the mounting bracket to the display using 4 screws. This helps
avoid potentially dangerous situations when lifting the display out of the mounting
bracket.
Positioning the display
For the best results, choose a place where there is no direct light shining onto the
screen, and which is some distance away from radiators or other sources of heat.
Leave a space of at least 10 cm all around the display for ventilation, making sure
that curtains, cupboards etc. cannot obstruct the airflow through the ventilation
apertures. The display is intended for use in a public places only and should
never be operated or stored in excessively hot or humid conditions.