Philips CPWUA001 Network Card User Manual


 
The WEP (Wired Equivalent Privacy) implemented in this Wireless USB
Adapter is based on the RC4 encryption algorithm.Please, select Hex or
ASCII for your Key Type.
If the Key Type is set to Hex, the security keys are four 10 digit keys for
the 64-bit WEP setting and four 26-digit keys for the 128-bit WEP setting.
(The hexadecimal digits can be 0~9 & A~F, e.g. D7 0A 9C 7F E5.)
If the Key Type is set to ASCII, the security keys are four 5-digit keys for
the 64-bit WEP setting and four 13-digit keys for the 128-bit WEP setting.
Consult the ASCII/HEX conversion table if you need to translate a (case
sensitive) ASCII key into HEX notation. Example: MNode (ASCII) = 4D
4E 6F 64 65 (HEX).
Default Key Choose the Key ID that has the encryption string you prefer.
If you are using a key generated from the passphrase, you must use the
same passphrase and key on each wireless device.
Passphrase If Passphrase is checked, security keys for WEP encryption are
generated from your passphrase string. If encryption is set to 128 bit, only
Key 1 is generated. If encryption is set to 64 bit, Keys 1-4 are generated.You
must use the same passphrase on all the other stations in your network.
Note:A passphrase string can consist of up to 32 alphanumeric characters.
After entering the passphrase, click Apply.
The WPA (WiFi Protected Access) implemented in this Wireless USB
Adapter uses an alphanumeric password between 8 and 63 characters long.
This password may include symbols and spaces.
IMPORTANT:You must use the same encryption key throughout your
network.
Network settings
From the Windows Control Panel (Start > Settings > Control Panel),
double-click the Network icon or select your Network properties. If your
operating system has a Networking Setup Wizard, please use that Wizard to
configure your network.
You need to set the same Workgroup name for all computers and devices
in the network, and a different computer name for each computer.You also
need to share some of your resources (folders on your computer or a
printer connected to it) to be able to see your computer on the network.
Sharing folders can be done by right-clicking on that resource in Windows
Explorer,and selecting the Sharing menu item.
If you have manually set your IP-addresses, you also need to make sure that
every computer and device in the network has a different IP-address, but
has the same subnet mask.
ENGLISH 13
WEP key
conversion table
ASCII HEX
030
131
232
333
434
535
636
737
838
939
A41
B42
C43
D44
E45
F46
G47
H48
I49
J4A
K4B
L4C
M4D
N4E
O4F
P50
Q51
R52
S53
T54
U55
V56
W57
X58
Y59
Z5A
a61
b62
c63
d64
e65
f66
g67
h68
i69
j6A
k6B
l6C
m6D
n6E
o6F
p70
q71
r72
s73
t74
u75
v76
w77
x78
y79
z7A