Filter
Top Products
12 Calling
2. Calling
This chapter describes the features and options related
to making and receiving calls.
Switch on the phone
Long press
)
to switch on the phone.
You may set a security code (PIN code) on your
phone to protect it from unauthorised use. When you
have set a security code, you will be prompted to enter
the corresponding security code when you switched
on the phone.
1. Enter the PIN code. For security reasons, the
screen will display “*” to represent the numbers
you have entered. If you have entered the wrong
number, press
R
Clear
to clear it.
2. Press
L
OK
. The phone will validate the PIN
code and commence network registration.
3. Once a network name is displayed on the screen,
you are ready to make or answer a call. If there is
no network name on the screen, you need to re-
register.
If you enter a wrong PIN code 3 times in succession,
your SIM card will be blocked. To unblock it, you
must request the PUK code from your operator. If you
enter a wrong PUK code 10 times in succession, your
SIM card will be permanently blocked and cannot be
used anymore. If this happens, please contact your
network operator.
Switch off the phone
At all times, you can long press
)
to switch off the
phone.
Make a call
You can make a call only when the network name
appears on the screen.
1. Enter the phone number.
2. Press
(
to dial the number; or press
L
Options
to enter options menu, then select Dial > IP Dial,
Handsfree dial, or IP Handsfree dial.
Options during a call
During a call, you can press
L
Options
to carry out the
following operations:
- Activate/cancel handsfree
- Activate bluetooth headset (if applicable)
- Mute/Unmute the call
- Put the call on hold
- Dial a new number