Philips LC 6285 Projector User Manual


 
>
To switch the projector in or out of the Power/Standby mode.
The indicator on the button:
– lights red when the projector is in Power/Standby mode;
– lights green when the projector is in operation mode;
– slowly blinks green when the projector is warming up;
– slowly blinks red when the projector is cooling down;
– fast blinks red/yellow for 1 second when the projector receives a signal from the remote
control in Power/Standby mode;
– fast blinks green/yellow for 1 second when the projector receives a signal from the remote
control in operation mode.
– Lights up red in case of lamp error
– Fast blinks red in case of temperature error
To receive the signals from the remote control.
To adjust the vertical angle of the projector.
To adjust the focus of the projected image.
On LC6285 only
Adjust the size of the projected image.
To activate and deactivate the menu.
To adjust the volume.
To confirm actions in the menu when the menu is on screen.
To reduce/enlarge the size of the projected picture.
To select the current projection source (Auto, Multimedia,YPbPr, RGBsync, RGsogB, S-Video,
Video).The button toggles between the seven signals.
When ‘Auto’ is selected the source with the highest priority will automatically be selected
(Multimedia,YPbPr or RGsogB, RGBsync, S-Video,Video).When only one input source is
connected, this will automatically be selected.
y On / Standby 1
Standby/Remote control
indicator
Error indicator 2
IR sensor 3
Height/Level adjuster 4
Focus ring 5
Zoomring 6
Menu 7
Volume –/+ 8
OK 9
Picture size –/+ 0
Source !
Philips Home Cinema Projector 10 English User guide LC 6281 / LC 6285
2. Functional overview