Philips 150S4FG Computer Monitor User Manual


 
Troubleshooting
Troubleshooting
Safety and TroubleshootingFAQsCommon Problems Imaging ProblemsRegulatory
InformationOther Related Information
This page deals with problems that can be corrected by the user. If the problem still persists after you
have tried these solutions, contact your nearest Philips dealer.
Common Problems
Having this problem? Check these items
No Picture
(Power LED not lit)
Make sure the Power cable is plugged to the
wall and the back of the monitor.
Firstly, ensure that the power button in front
of the monitor is in the OFF position, then
press it to ON position again.
No Picture
(Power LED is amber or yellow)
Make sure the computer is turned on.
Make sure the signal cable is properly
connected to your computer.
Check to see if the monitor cable has bent
pins.
The Energy Saving feature may be activated
Screen says
Make sure the monitor cable is properly
connected to your computer. (Also refer to
the Quick Set-Up Guide).
Check to see if the monitor cable has bent
pins.
Make sure the computer is turned on.
file:///D|/B/english/150s4fgbs/safety/saf_troub.htm (1 of 3) [8/27/03 11:39:40 AM]