Filter
Top Products
User Manual BDS4622V/R and BDS4624R
21
16.PC AUTO
Press this button to activate auto adjustment (phase, V-sync and H-
sync), if there is a display problem in PC mode after timing change.
17.VIDEO
Press this button to select a Video input source.
Scart 1 => Scart 2 => AV => Component (cyclical).
The sequence of the inputs varies for different input modules.
18.PC
Press this button to select an PC-input source.
VGA=>DVI (cyclical)
19.SLEEP
Press this button to set timer off.
20.INPUT
Press this button to select an input source.
21.INFO
Press this button to display the current input source and display
mode.
22. /
Use these buttons to select an OSD item up and down.
23.+/ -
Use these buttons to select an OSD item left and right.
24.ENTER
Press the , , + or - button to move the highlight bar to the
desired menu and adjust settings.
Press the ENTER button to save the settings.
25.MENU/EXIT
Press the MRENU button activate the OSD menu.
Press the , , + or - button to move the highlight bar to the
desired menu and adjust settings.
Press the EXIT button to exit the OSD menu.
26.MUTE
Press this button to switch off the speakers.
Press again to switch on.
27.PR /
Press this button to select a TV channel.
(Only applicable for BDS4622R and BDS4624R)
28.Input
Change input signal selection.
29.Number Keypad
Use number keypad to select the TV channel you want to watch.
(Only applicable for BDS4622R and BDS4624R).