Filter
Top Products
User Manual BDS4622V/R and BDS4624R
27
7. BASIC FUNCTIONS
7.1 POWERING ON/OFF
Make sure the monitor is plugged into the wall outlet and the main AC
switch located in the rear of the monitor is switched to ON position.
If the power is plugged in and the AC switch is on, the STATUS LED will
blink for a few seconds in green before it illuminate in red color
(STAND BY).
Using Front Panel or Remote Control
1 Press the POWER button on the front panel or the remote control.
The monitor will now turn on after a brief pause.
The STATUS LED will now turn green to indicate power on status.
2 Turn off the power by pressing the POWER button on the monitor
panel or remote control again.
Status LED:
■ Not Illumated = No AC Power detected
If the main power switch (rear of panel) is turned off, this LED will
not illuminate.
■ Red = Standby (Power OFF) with AC power detected
The LED will illuminate in red color if the monitor is in standby
mode.
■ Solid Green = Power ON
■ Blinking = Sleep mode