Filter
Top Products
Installing “without” a Windows 98SE installation CD
NOTE: This is not the recommended installation method but is
provided here as a work around solution until a Windows 98SE
install CD can be obtained.
1. Upon boot up, after installing the PSC hardware, cancel the “Found New
Hardware Wizard” when it appears.
2. Install the Philips installation CD. Note: If using a driver from the web double
click the Web Driver .exe file and skip to step 4.
3. Select “Install Philips Sound Card Drivers” from the autolauncher panel when
it appears.
4. Proceed with the installation normally until the following panel appears.
5. (We are assuming there is no 98SE CD to install); Click OK.
6. The following “Copying Files” panel will appear:
7. Click the Skip File button.