Philips WAR1900 Network Router User Manual


 
B1
Connect to WAK3300
Place the WAK3300 beside the WAC7000
1
Connect the WAK3300's power cord to a wall outlet
2
Press the navigation controls 3 or 4 and 2 to set language
and clock, then select "Philips Music Center"
3
Check that the WAC7000 is switched on and is already in
the HD mode
Connect WAR1900 to WAC7000
Mount on the antenna and then connect the WAR1900 to
power supply
Both Power and Wireless indicators light up blue
(takes 10-15 seconds), when Extender is ready for
connection
2
IMPORTANT!
• Make sure the selector is set at AP position.
Place WAR1900 side by side with the WAK3300 and its
connected device WAC7000 on a flat and firm surface
1
On WAC7000, press and hold SAME ARTIST until the
display shows "OK for Extender..."
3
ETHERNET
VOLTAGE
SELECTOR
NOT FOR ALL
VERSIONS
AUX
IN
R L
R L
LINE
OUT
TO Modem/PC5V=1A AP ECRP
TO Modem/PC5V=1A AP EC RP
Wireless Repeater 11g True Turbo
Wireless
Modem PC
Power
AP EC RP
Power
Wireless
SAME
ARTIST
Connecting WAK3300 to WAC7000
4