C2
Q: Why can’t I see the
message “Ok for
Extender ...”
Q: How do I know if the
Extender is working?
Q: Why it's still hard to
create connection
between my Center
and Station(s) after
used the Extender?
A: You may check the connection by pressing Menu >
Information > Wireless > SSID.
A: Please adjust the distance between the Extender and the
Center/Station(s) (refer to "Relocate" step 2)
Frequently Asked Questions
A: Please check if the Extender is set at “AP” mode.
Important safety information
• Please install and connect the product in the order as described in the 'Quick Start Guide'
booklet only. This assures best installation results with the least technical hassles.
• Please read the 'Quick Start Guide' booklet carefully before using the Wireless Range Extender
(WAR1900); and keep these documents for future reference.
• The most recent downloads and information on this product will be available through our web
site www.philips.com/support
Safety Precautions
• Radio equipment for wireless applications is not protected against disturbance from other radio
services.
• Do not expose the system to excessive moisture, rain, sand or heat sources.
• The product should not be exposed to dripping or splashing. No object filled with liquids, such
as vases, should be placed on the product.
• Keep the product away from domestic heating equipment and direct sunlight
• Allow a sufficient amount of free space all around the product for adequate ventilation.
• Do not open this product. Contact your Philips retailer if you experience technical difficulties.
Enjoy