Filter
Top Products
4
Unpacking
Carefully remove units from packaging. If there is any visible
damage, DO NOT attempt to operate the equipment. Notify your
dealer or shipping carrier immediately. Keep this guide for future
u s e .
System Contents
• Base Unit
The base unit has two telephone
jacks on the right side and a green
light on the front.
• Extension Unit
The extension unit has one
telephone jack on the right side and a green indicator light on the
front. This is the unit that can be moved from location to location
to create a phone jack in an electrical outlet.
• Telephone Cord (6’)
A 6 ft. telephone cord is provided to connect
the base unit to the existing wall phone jack.
Follow the steps below to install the Wireless Jack for Modems
S y s t e m .
Base Unit
1. Plug one end of the provided telephone cord into either jack on
the right side of the base unit, and the other end into any existing
wall phone jack.
2. The phone previously used at that location should now be
plugged into the
extra jack on the
side of the base unit.
3. Now plug the base
unit into an electrical
outlet.
Getting Started
Installation
Wall
Phone Jack
Wall Outlet
Base Unit
Telephone
Cord