Filter
Top Products
TSMS-5/16RK
6
Rev. 04/05
Ph: 800-421-6511
www
.picomacom.com
Operation and Controls
Front Panel
1. 18V 22KHz:
Connect the 18Vdc 22 KHz output of a LNB to this port.
2. 14V 22KHz:
Connect the 14Vdc 22 KHz output of a LNB to this port.
3. 18V 0KHz:
Connect the 18Vdc 0KHz output of a LNB to this port.
4. 14V 0KHz:
Connect the 14Vdc 0KHz output of a LNB to this port.
5. ANT IN:
Connect the cable from a off-air antenna to this port.
6. OUT:
Connect a satellite receiver to this port. If an off-air antenna
is employed, insert a TSDM-2150 diplexer between the OUT
port and the receiver input.
7. Power Cord:
Insert the power cord into a 3 prong 120Vac 60Hz
r
eceptacle only
.
Back Panel Control
TSMS516RK Manual.qxd 4/12/05 2:57 PM Page 6