Filter
Top Products
Upgrade Summary
Review this summary of upgrade steps before proceeding. They provide an overview of the upgrade path you
need to follow for each scenario.
Upgrading with LiveLAN 2.0 installed
If LiveLAN 2.0 is installed on your PC:
• Replace the FTP Software OnNet TCP/IP stack with the Microsoft TCP/IP stack
• Install the LiveLAN Multimedia Accelerator (codec) board
• Install the LiveLAN 3.1 software
• Reconnect your camera, speakers, and microphone to the LiveLAN Multimedia Accelerator board.
You can also deinstall the Logitech MovieMan software and board if you choose; the instructions are included
in this guide.
Upgrading without LiveLAN 2.0 installed
If you purchased LiveLAN 2.0, but did not install it:
• Install the LiveLAN Multimedia Accelerator board
• Install the LiveLAN 3.1 software
• Attach the camera, microphone, and speakers (included in your LiveLAN 2.0 kit) to the LiveLAN
Multimedia Accelerator board.
Package Contents
In addition to these upgrade instructions, make sure your LiveLAN 3.1 upgrade kit contains the following
items:
• LiveLAN 3.1 CD-ROM (includes software, online installation and product guides, and online release
notes)
• LiveLAN Media Accelerator Board (the “codec” board)
• Video camera adapter cable
• LiveLAN 3.1 Hardware Installation Guide
System Requirements
To run LiveLAN 3.1 on your PC, your PC must meet the following system requirements:
Note: It is recommended, but not required, that LiveLAN 3.1 be used in conjunction with LiveManager 3.1.