Filter
Top Products
28
Link Configuration
Required for Dedicated/Leased Line Operation
Dedicated line operation is the simplest to set up.
• Set Dedicated connection
• Set PPP connection
RV: Use the WAN - Link screen.
CL: Use interface(misc) and then wan connect(set).
Suggested for Dedicated/Leased Line Operation
Dedicated line operation generally does not require additional parameters for
operation.
Required for Dial-On-Demand Operation
Incoming dial-on-demand operation requires only slightly more information than
dedicated line setup. Outgoing dial-on-demand requires additional information (see
the suggested settings below).
• Set dial-up connection
• Set PPP connection
• Set to allow dial-in and/or dial-out
RV: Use the WAN - Link screen.
CL: Use interface(misc) and then wan connect(set).
Suggested for Dial-On-Demand Operation
Outgoing dial-on-demand requires some additional information.
• Set dialing method
• Create dial-out script
• Set dial-out script to be used
• Set inactivity time
RV: Use the WAN - Link window to set the dialing method and to select a chat
script (once you have created one). Use the Chat Script Editor window (All - Link)
to create your chat script.
CL: Use interface(misc) and then wan connect(set) to set the dialing method and
inactivity time, and to select a chat script (once you have created one). Use the
chat(edit) command to create a chat script.