Pioneer CD-BTB20 Network Card User Manual


 
% Display and switch the device informa-
tion
Refer to Function compatibility charts on page
26.
Each time you operate according to Function
compatibility charts the information changes
in the following order:
BD (Bluetooth Device) addressDevice name
(PIONEER)System versionBluetooth mod-
ule version
# On your cellular phone, you can confirm the
device name of this unit as Pioneer BTunit.
Connecting a Bluetooth
audio player
For this unit to control your Bluetooth audio
player it needs to establish a Bluetooth wire-
less connection.
This function initiates the connection via Blue-
tooth wireless technology.
Important
When using this unit as an external unit, the PIN
code is set to 0000. You can not change the PIN
code. This unit can connect only the Bluetooth
audio player which request 0000 as the PIN code
or does not request any PIN code.
1 Put the unit in C.OPEN mode
Refer to Function compatibility charts on page
26.
This unit is now on stand by for connection
from Bluetooth audio player.
If your Bluetooth audio player is set ready for
Bluetooth wireless connection, connection to
this unit will be automatically established.
# Before you put the unit in C.OPEN mode
NO AUDIO is displayed.
2 Use the Bluetooth audio player to con-
nect to this unit.
When the connection is established,
BTAUDIO is displayed.
# Operation varies depending on the type of
your Bluetooth audio player. Refer to the instruc-
tion manual that came with your Bluetooth audio
player for detailed instructions.
# You may need to enter the link code on your
Bluetooth audio player to complete the con-
nection.
Disconnecting a Bluetooth
audio player
When you are done using your Bluetooth
audio player with this unit, you can close the
Bluetooth wireless connection.
% Put the unit in DISCONN. mode.
Refer to Function compatibility charts on page
26.
After the disconnection is completed,
NO AUDIO is displayed.
Operating with different
head units
En
34
Section
05