Filter
Top Products
SV60975 Rev A
Supplies and Adjustments
17
Adjusting the Feeder
For best feeding results with most media (including tri-fold material),
raise the top tension knob and turn the front tension knob to the plus (+)
sign.
For postcards, position the front adjustment knob to minus (-) and the
top tension knob down.
If envelopes are not being fed properly, you may have to adjust the
tension knobs as instructed below.
Top tension knob:
To correct double feeding, place the knob in down position. To put knob
in down position, push knob down, a little more than halfway, and rotate
counterclockwise until the knob locks in place.
For mail 1/8" to 3/8" thick: knob must be in up position. To put knob in
up position, push knob down and rotate clockwise until the knob pops
up.
Front tension knob:
For thin materials:
1. Adjust the front tension knob to the two o'clock position.
2. As the mail feeds, turn towards the plus (+) sign in small increments
until mailpieces feed properly.
When returning to regular mail thickness, reset knobs to previous
setting.
Top Tension Knob
Front Tension
Knob
Feeder Adjustments
Top Tension Knob
Front Tension
Knob