Filter
Top Products
QUICK LINKS
Contents
Index
Regulatory Compliance
Product Information
Warranty
GETTING STARTED
About the Display
Package Contents
Identify Components
Position Display
Desk Stand Features
INSTALLING THE DISPLAY
Set DIP Switch
Install Display Controller
Connect Video and Power
Install Display Driver
Change Display Properties
Dome CXtra Software
APPENDIXES
Troubleshooting
Specifications
LED Status Lights
Single Desktop
USB Connection
Component Removal
Power Management
Palette Options
1
Dome C3 Display
About the Dome C3 Display
The Dome C3 display system consists of a 528-mm (20.8-in.) TFT LCD panel and
a DX display controller and driver. The display’s thin film transistors (TFTs), in
a transmissive-type display, use an integrated cold cathode fluorescent tube (CCFT)
backlight system.
The display is designed for 3-megapixel (1536 x 2048) grayscale medical imaging in
diagnostic settings, in either portrait or landscape orientation. It comes fully tuned
with gamma correction that complies with the DICOM Part 14 Standard. An all-
digital design enables the display to produce the sharp, crisp images critical to
softcopy medical viewing. Unwanted analog display image artifacts, such as noise,
jitter, ghosting, and image smearing are eliminated.
The Dome C3 display is available as a color or grayscale panel. Each model offers
the following key features. See the specification for more information.
•
3061 distinct shades of gray
•
AMLCD technology for consistent image quality
•
Exceptional contrast ratio for viewing images in well-lit areas
• Accelerated hardware rotation for viewing images in portrait or landscape mode
• Calibrated to DICOM response curve
• Automated calibration and backlight stabilization through RightLight technology
The Dome CXtra™ software enhances the functionality of the Dome C3 display.
CXtra provides a range of value-added services, such as DICOM calibration,
error reporting, and backlight saver. Refer to the CXtra 3.0 User’s Guide for
more information.
Before installing the display system, review the safety and installation precautions.
Once your display system is in operation, follow the guidelines for cleaning and
servicing your unit.
Systems requirements
Computer system
PCI slot per board
50 MB hard disk space
256 MB RAM
CD-ROM drive
Operating system
Windows XP or Windows 2000