Filter
Top Products
PE1500 User’s Manual
10
Doing Adjustment in the OSD Menu
Doing Auto Setup
To doing the Auto Setup function you should follow the steps below:
1. Bring-up the OSD “Main Menu”.
2. The ‘Auto’ icon should be highlighted already.
3. Use ‘Select’ button to select and execute the Auto Setup function. After the execution of the
Auto Setup function, it will show-up the follow message:
If the image looks correct, choose Ye s.
OR
If the image requires further adjustment, choose No, it will shown up ｀Phase＇ bar for your
further adjustment by manual. Then you can adjust phase by ｀Up(△)＇ or ｀Down(▽)＇
buttons. When all text appears well focused and there is no instability in the image, press the
‘Select’ key to end up the adjustment.