PE1500 User’s Manual
14
Note: We recommend you do Auto Setup first. And adjusting the clock setting only if the image
looks incorrect.
If `Phase' is selected, you may use `Up(△)' or `Down(▽)' buttons to adjust the
setting of phase. The fullness of the graphic bar as well as the numerical value at the right
corner are also changed accordingly.
Note: We recommend you do Auto Setup and to see whether the phase needs to adjust or not.
If ‘Exit’ is selected, it will exit the “Clock/Phase” submenu and back to the “Main Menu”.
Doing adjustment in the “Color” Submenu
To do adjustment in the “Color” submenu you should follow the steps below:
1. Bring-up the OSD “Main Menu”.
2. Use `Up(△)' (or `Down(▽)') to move forward (or backward) to the color icon and
highlight it.