Filter
Top Products
25
E. The image is very unstable.
1. Set your PC to a supported video mode, preferably 1280 x 1024 at 60 Hz. See “Setting the
Video Mode” on page 8.
2. Restore the original factory settings by choosing Factory Recall in the OSD “Factory
Recall” submenu.
3.
Perform the Auto Setup function. See “Auto Setup by Direct Key” on page 22.
Note:
Even if your PC’s setting is out of the range of video modes that are supported by your
LCD monitor, it may still be displayed with reduced quality. This provides you with an
opportunity to change your PC’s setting to a correct one.