Filter
Top Products
7
Using Your Display
This chapter contains information about using your LCD Monitor.
Turning the Display On and Off
Use the power button located at the lower right side of the front panel of the display to turn the
display on and off. When the display is on, the light (LED) near the Power button is illuminated.
The light is green when both the display and PC are active and amber when the display is in
power-saving mode.
If your PC supplies power saving signals to the display, the display’s power management features
reduce power consumption to low levels when your PC goes into its power-saving mode. See
“Minimizing Power Consumption” on page 9 for more information.
If your PC doesn’t use industry standard power-saving techniques, you can reduce power
consumption by turning off the display when it won’t be used for an extended period. You can turn
the display off even if you leave your PC in running.
Note:
Because of the technology used in LCD panels, screen savers will not prolong the life of
your display. Be sure to turn off the display if it will not be used for an extended period.
Warning
To completely disconnect power from your display, you must
remove the power cord from the wall outlet and then remove
the power cable from the display.