Filter
Top Products
E
N
G
L
I
S
H
Important Safety Instructions
Read the Safety Instructions carefully and keep it for later use.
Be aware of all warnings and instruction signs marked on the products.
When cleaning, cut off the electrical supply at all times. Never use liquid or aerosol
detergent, use a damp rag instead. For more details, please refer to P.4 ‘Cleaning the
Monitor.’
Always keep the product away from heavy moisture.
Keep this product stable all times. The product may fall causing serious damage.
Do not clog apertures on the bezels used for ventilation purpose. Do not install this
product in poor ventilated areas. Always keep this product away from all kinds of heat
sources.
The power source used for this product must match one marked on the product's label.
Please consult your dealer if you have any doubt.
In order to avoid electric shock, a 3-wire plug with a grounding pin is provided. Do not
use any kind of plug without grounding.
Do not lay the power cord on the pathway or rest anything heavy on it.
Do not insert objects or pour liquid into this product through apertures on bezels. It may
touch a high voltage area causing an electric shock or short circuit.
Do not attempt to repair the product by yourself. It may expose you to electric shock.
Contact a dealer near you for service.
Do not unplug the power cord under the following circumstances. A qualified field service
electrician is needed.
When the power cord is damaged or frayed.
If liquid has been poured into the product.
If the product has been exposed to rain or heavy moisture.
If the product can't be adjusted and operated properly by following the operating
instructions. Intent to do more advanced adjustments may result in extensive work
for field service electrician.
If the product has been dropped or the casting is broken.
If there is a dramatic change of the performance.
A proper type of power cord has been selected according to the safety of destination and
must be used to prevent electric shock.
PL170M
1