Filter
Top Products
26
below:
1. Power on the computer.
2. Make sure that the RS232 or USB cable is connected to the computer.
3. Using Platform Builder, build an image file by following the step-by-step
instructions found in the zipped file on the CD.
Please note: Do not plug in both RS232 and USB cables. Doing so may cause
a driver conflict, making your touch screen idle.
PT1505MU / PT1555MU Driver Install:
The touch driver is located on the enclosed CD-ROM for these
OS: Windows® VISTA, XP, 2000, 98.
1. Be sure that USB cable is connected from the computer.
2. Power on the computer.
3. Load the touch screen driver CD.
4. Follow the step-by-step instructions as shown on pop-up windows.