Filter
Top Products
VS15 Display
19
QUICK LINKS
Contents
Index
Ordering Parts
Product Information
Regulatory Compliance
Warranty
GETTING STARTED
About the Display
Unpack Display
Identify Components
INSTALLING THE DISPLAY
Connect Power
Connect Video
Connect Audio
Connect Touch Screen
Power Management System
USING THE CONTROLS
Display Controls
OSD Menu
Function Menus
OSD Lockout
DDC Change
APPENDIXES
Technical Information
Troubleshooting
DDC Change
Follow these instructions to change the display from analog to digital mode or
from digital to analog mode.
1 Make sure the display power is ON. (The LED indicator is steady or blinking).
2 Disconnect video cable from the display. The display indicates “No Video.”
3 Wait for the “No Video” message to disappear.
4 Push the Function UP ( ) and Adjust MINUS ( ) buttons simultaneously.
This creates a change in the DDC file; one of the following messages appears.
The message on the left indicates a change from analog to digital mode.
The message on the right indicates a change from digital to analog mode.
5 Plug the video cable into the display. The display shows the supplied
video input.