Filter
Top Products
Mode: Select Routing (default). If your ISP allows multiple computers to share an
Internet account. Otherwise select Bridge.
Encapsulation: Select the encapsulation type your ISP uses from the
Encapsulation drop-down list box. Choose vary depending on what you select in
the Mode field.
If you select Bridge in the Mode field, select 1483 Bridged IP.
If you select Routing in the Mode field, select PPPoA, 1483 Bridged IP, 1483
Router IP, or PPPoE.
Multiplex: Select the multiplexing method used by your ISP from the Multiplex
drop-down list box either VC-based or LLC-based.
Virtual Circuit ID: VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier)
define a virtual circuit.
VPI: Enter the VPI assigned to you. This field may already be configured.
VCI: Enter the VCI assigned to you. This field may already be configured.
4.1.2 PPPoE
PPPoE PPP over Ethernet provides access control and billing functionality in a
manner similar to dial-up services using PPP. Select PPPoE from the
Encapsulation in the first wizard screen to display the screen as shown.
25