Filter
Top Products
8
Chapter 3. Configuration
The ADE-4200/ADW-4200 can be configured with your Web browser. The web browser
is included as a standard application in the following operation systems, UNIX, Linux,
Mac OS, Windows 98/NT/2000/Me, etc. The product provides a very easy and user-
friendly interface for configuration.
3.1 Before Configuration
This section describes the configuration required by LAN-attached PCs that
communicate with the ADE-4200/ADW-4200, either to configure the device, or for
network access. These PCs must have an Ethernet interface installed properly, be
connected to the ADE-4200/ADW-4200 either directly or through an external repeater
hub, and have TCP/IP installed and configured to obtain an IP address through a DHCP
server or a fixed IP address that must be in the same subnet of the ADE-4200/ADW-
4200. The default IP address of the ADE-4200/ADW-4200 is 192.168.1.254 and subnet
mask is 255.255.255.0. The best and easy way is to configure the PC to get an IP
address from the ADE-4200/ADW-4200. Also make sure you have UNINSTALLED any
kind of software firewall that can cause problems accessing the 192.168.1.254 IP
address of the router.
Please follow the steps below for PC’s network environment installation. First of all,
please check your PC’s network components. The TCP/IP protocol stack and Ethernet
network adapter must be installed. If not, please refer to MS Windows related manuals.
Any TCP/IP capable workstation can be used to communicate with or through
the ADE-4200/ADW-4200 To configure other types of workstations, please
consult the manufacturer’s documentation.
3.2 Connecting the ADE-4200/ADW-4200
1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone
network.
2. Power on the device
3. Make sure the PWR and SYS LEDs are lit steady & LAN LED is lit.
4. Before proceeding to the next step, make sure you have uninstalled any software
firewall.
3.3 Configuring PC in Windows
3.3.1 For Windows 98/ME
1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on
Network and choose the Configuration tab.