Filter
Top Products
- 17 -
7. RJ-45 PIN ASSIGNMENT
When connecting your FNSW-3200 10/100Mbps Ethernet
Switch to another switch, a bridge or a hub, a straight or
crossover cable is necessary. Each port of the Switch supports
auto-MDI/MDI-X detection. That means you can directly con-
nect the Switch to any Ethernet devices without making a
crossover cable.
The following table and diagram show the standard RJ-45 re-
ceptacle/ connector and their pin assignments:
RJ-45 Connector pin assignment
Contact
MDI
Media Dependant
Interface
MDI-X
Media Dependant
Interface -Cross
1 Tx + (transmit) Rx + (receive)
2 Tx - (transmit) Rx - (receive)
3 Rx + (receive) Tx + (transmit)
4, 5 Not used
6 Rx - (receive) Tx - (transmit)
7, 8 Not used
The standard cable, RJ-45 pin assignment
The standard RJ-45 receptacle/connector