Filter
Top Products
- 5 -
2.2.4 Status LEDs
One POWER LED to show power On/Off is on the front panel
and each port has two status LED indicators, as shown below.
L
ABEL
S
TATUS
/
C
OLOR
M
EANING
D
ESCRIPTION
Steady
orange
100M Lit to indicate that a valid physical
UTP/STP connection exists on
that port runs in
100Mbps
U
PPER
ROW
OFF 10M Remains off and Link ON to in-
dicate the port runs in 10Mbps
Steady
Green
Link Lit to indicate that a valid physical
UTP/STP connection is detected
L
OWER
ROW
Blink
Green
Activity Blink to indicate the port is re-
ceiving data packets
Table B: The Switch's Port-LED Functions
2.3 The Rear Panel
Figure 2: Rear View for FNSW-3200
2.3.1 Power Connector
The Power Connector is designed to be use with the power cord
included in the product package. Attach the female end of the
cord to the power connector and the male end of the cord to a
grounded power outlet. The accepted power range is from
100VAC to 240VAC, 50/60Hz.
50-60 Hz
100-240V AC