Filter
Top Products
PLANET Technology Corp. GRT-101/401/402 User’s Manual
3.3.6 Administration
This session introduces security and simple network management protocol
(SNMP) and time synchronous.
Security
For system secutiry, suggest to change the default user name and password in
the first setup otherwise unauthorized persons can access GRT series and
change the parameters.
There are three ways to configure GRT series, Web browser, telnet and serial
console.
Press Security to setup the parameters.
For greater security, change the
Supervisor ID and password for the
gateway. If you don’t set them, all
users on your network can be able to
access the gateway using the default
IP and Password root.
You can authorize five legal users to
access GRT series via telnet or
console. There are two UI modes,
menu driven mode and command
mode to configure GRT series.
Legal address pool will setup the legal
IP addresses from which authorized
person can configure the gateway.
This is the more secure function for
network administrator to setup the
legal address of configuration.
Click Finish to finish the setting.
The browser will prompt the
configured parameters and check it
before writing into GRT series.
Press Restart to restart the gateway
working with the new parameters and press Continue to setup other
parameters.
- -
29