Filter
Top Products
PLANET Technology Corp. GRT-101/401/402 User’s Manual
Note: GRT series comes pre-configured without any constraint on the legal access IP addresses of Telnet clients and
web browsers for convenience. However, it is very important to setup management security to prevent invalid access
to GRT series from Internet.
3.16 SNMP Support
In addition to managing GRT series by means of the command-line
applications and web browsers, you can manage the unit by using a simple
network management protocol (SNMP) management station. GRT series can
generate SNMP traps to indicate alarm conditions, and it relies on SNMP
community strings to implement SNMP security. Currently, SNMP (RFC 1157)
and SNMPv2c (RFC 1901) agents are implemented. Also, the management
information bases (MIBs) supported by GRT series include MIB II right now.
3.16.1 SNMP community
The below example adds GRT series into a SNMP community “private”, with
read/write access right for SNMP managers in the same community.
admin# admin snmp community 1 edit enable private read_write
To show the setting of SNMP communities with access right, type:
admin# admin snmp community 1 list
SNMP Community Pool
No Community Access Right
---- -------------------------------- ------------------
1 private Read_Write
2 (Empty)
3 (Empty)
4 (Empty)
5 (Empty)
To disable the SNMP community 1, enter the following command:
admin# admin snmp community 1 edit disable private read_write
To save your changes, enter:
admin# write
- -
67