Filter
Top Products
Figure 4-22 VLAN aware Configuration screen
#Notice:
Change VLAN settings for every time, you have to reboot the switch to apply new settings.
4.4.3.6 Set priority
This command configures the default 802.1p port priority assigned for untagged packets for a specific port of
GSW-2416SF. The correct usage is shown as below:
Set priority [n] [m]
[n]=1-24, n is the specific Port ID of GSW-2416SF.
[m] = 0-7, m is 802.1p priority.
Default Setting: 0
The per port priority setting screen
in Figure 4-23 appears. (Set Port 1 with priority “7”)
Figure 4-23 Priority Configuration screen
EM-GSW2416SFv1 - 26 -