Filter
Top Products
20
Restore the device:
a. Press the button down continuously.
b. Hold the button at least 5 seconds and release it. Then the device
has been restored to default settings and reboot again.
4. Power Jack
The input power is DC 12V.
Note
1. ONLY use package power adapter supplied with the
internet. Otherwise, the product may be damaged.
2. The power adapter is unnecessary when internet
camera is connected to a PoE switch. Otherwise, the
product may be damaged when internet camera is
connected to a PoE switch and power adapter simul-
taneously.
5. MIC in (audio in)
Connect a microphone to the IP camera.
6. Line out (audio out)
Connect a loud speaker to the IP camera. This is for voice alerting and
two-way audio.
2.5.3 ICA-HM135 Installation
1. Use provided L-wrench loosen the tamper-resistant housing cover
(with screws still attached on the cover). The unit has a factory
installed side conduit entry and one may adjust the cables to back
conduit entry according to installation requirement.