Filter
Top Products
30
In the LAN socket, there are two LEDs embedded:
LAN LED
(green color)
This LED will be ashing while network accessing via Ethernet.
Power LED
(orange color)
This LED is used to indicate whether DC power is on or not. In addition,
this LED will be ashing while the network accessing of the IVS-H120.
3. DI/DO/RS-485 Connector
This IVS-H120 provides a general I/O terminal block with one digital
input and one output for device control. It has 6 Pins that from left
to right that are 5V DC power supply (50mA maximum), Alarm Input,
GND, Alarm Output, D+ terminal of RS-485 and D- terminal of RS-485.
Note
The RS-485 of IVS-H120 is master that can control
external scanner or PTZ camera.
Right-hand side Panel
1. Reset Button
This button is hidden in the pinhole. Please refer to the Appendix A in
manual for more information.
2. MIC-in Jack
MIC-in (line level) jack allows any device that could input audio.
3. A/V Out Jack
After connect with the A/V cable attached in packaging, it not only
allows this device to output audio or alerting sound, but also it provides
composite video output. User can use A/V cable to connect the video
server with a TV monitor or VCR.