Filter
Top Products
17
5. MIC in (audio in)
Connect a microphone to the IP camera.
6. Line out
(audio out)
Connect a loud speaker to the IP camera. This is for voice alerting and
two-way audio.
2.4.3 ICA-HM130 Installation
1. Please select the most suitable position on the wall or ceiling to
install the IP camera.
2. Rotate the dome housing counterclockwise to remove it from the
mounting base.
3. Set the mounting base onto the wall or ceiling and center it over
the mounting hole, using the two retaining screws for the main body,
supplied by the appurtenance bag.
4. For lens adjustment, move the IP camera body (some model type’s
limits the PCB board to 180° rotational adjustment) and set the focus
by turning the lens to the left or right direction. When the IP camera
focus adjustment has been completed, rotate the dome housing
clockwise to secure it to the mounting base.