Filter
Top Products
System Protocol Setup - Main Setting
Label Description
System Authentication section
Click on the drop-down list to enable or disable the 802.1x authentication function of the system. If you
select “Disabled”, any setting in the Port Authentication section will not take effect.
Port Authentication section – Main Setting
Select the line bridge port range to be listed.
Select Port
Remember to select the checkbox when you want to modify/delete the
setting of a bridge port or set a bridge port to its default value.
Enable
OFF/ON: disable/enable 802.1x authentication function for the bridge
port. When 802.1x is disabled, the system allows bidirectional normal
traffic in this port in spite of its authentication state. Default is OFF.
Accounting Control
OFF: notify RADIUS server to stop accounting for this port.
ON: notify RADIUS server to start accounting for this port.
Default is OFF.
Accounting Interval
Type in the interval (300 ~ 600 sec) between accounting information
updates. Default is 300 sec.
Port Control
Force-unAuth: cause the port to stay in the unauthorized state, ignoring
all attempts by the client to authenticate.
Force-Auth: disable 802.1X authentication and cause the port to
transition to the authorized state without any authentication exchange
required.
Auto: enable 802.1x authentication and cause the port to begin the
authentication process from unauthorized state.
Max Request
Authenication
Type in the number of times our system will send authentication requests
to Supplicant if no response from the Supplicant is received. Default value
is 2.
ReAuthentication Control
OFF: disable re-authentication after a period of time
ON: enable re-authentication after a period of time
Default is OFF.
Max Request Type in the number of times our system will send authentication
ReAuthentication
requests to the authentication server (RADIUS) if no response from the
server is received. Default value is 2.
- 79 -