Filter
Top Products
PLANET Mesh Network Manager Guide
5.3.1.5 Network > WAN
Define the type of WAN interface to use. Three options are available: Static, DHCP, and
PPPoE. If user wishes to change the type to dynamic, select the DHCP, then click the Save
Changes button. If Static or PPPoE is selected instead, the Configure button will lead the
user to the configuration page of the type.
• Network > WAN > Static
Enter the Static IP Address and its netmask, click the Save Changes button to activate the
Static WAN interface type. Hit the Back to go back to the WAN Type configuration page.
Parameters:
1) IP Address
• The static IP Address for the WAN interface
• Data type: IP Address
PLANET Mesh Network Manager Guide
Page71 of 124