PLANET Mesh Network Manager Guide
5.3.1.16 Services > NAT
The Network Address Translation service enables the clients with IP addresses that are not
globally unique to connect to the network by translating those addresses into a globally
routable IP address space.
Parameters
1) Enable NAT Service
• A checkbox to enable or disable the NAT service
Parameters (NAT Table column)
1) Protocol
• Protocol to use. Choose from UDP, TCP and Both
2) Port
• The port number to forward to.
• Data type: Integer, in the range of 1 to 65535
3) IP Address
• The destination host IP Address
• Data type: IP Address
PLANET Mesh Network Manager Guide
Page95 of 124