8
A list of all the NAS-7100s on your network will show on the left side. The right
side displays details of the currently selected NAS-7100.
If the desired NAS-7100 is not listed, check the following:
• The NAS-7100 has nished the start up and boot process.
• Your PC and the NAS-7100 are on the same IP segment.
• Click “Refresh” button to search again.
Otherwise, select the desired NAS-7100, and click the "Next" button.
4. The following screen will then be displayed. You can set the IP settings in this
screen. Please click “Next” after the congured.
Obtain an IP address
automatically (DHCP
Client)
Select this only if your LAN has a DHCP Server.
Fixed IP Address
This option is recommended. You need to enter the
following data.
• IP address - The utility will suggest a unused IP
address within the address range used on your
LAN. If you wish, you can change this, but you
must ensure the address is unused.
• Network Mask - This must match the value used
by PCs on your LAN.
• Gateway - This must match the value used by PCs
on your LAN.