Filter
Top Products
- 3 -
As all ports support 200Mbps, the Switches can be cascaded from any
port and to any number of switches.
The Switches are a perfect choice for site planning to upgrade to Fast
Ethernet in the future. Ethernet workgroups can connect to the Switches
now, and change adapters and hubs anytime later without needing to
change the Switches or reconfigure the network.
The Switches combine dynamic memory allocation with store- and-forward
switching to ensure that the buffer is effectively allocated for each port,
while controlling the data flow between the transmit and receive nodes to
guarantee against all possible packet loss.
The Switches are unmanaged 10/100 Fast Ethernet Switch that offers
solutions in accelerating small Ethernet workgroup bandwidth.
Other key features:
Auto MDI/MDIX for each port for Uplink to another switch, hub or
repeater.
Store and forward switching scheme capability. As the result of
complete frame checking and error frame filtering, this scheme
prevents error packages from transmitting among segments.
N-Way Auto-negotiation for any port. This allows for auto-sensing
of speed (10/100Mbps) thereby providing you with automatic and
flexible solutions in your network connections.
Flow control for any port. This minimizes dropped packets by
sending out collision signals while the port’s receiving buffer is full.
Note that flow control is only available in half-duplex mode.
Data forwarding rate per port is at wire-speed for 100Mbps speed.
Data forwarding rate per port is at wire-speed for 10Mbps speed.
Data filtering eliminates all error packets, runts, etc., per port at
wire-speed for 100Mbps speed.
Data filtering eliminates all error packets, runts, etc., per port at
wire-speed for 10Mbps speed.
Up to 1K active MAC address entry table with self-learning and
table-aging for the Switch.