Filter
Top Products
25
Figure 3-5: Connecting Multiple PCs to an Ethernet LAN
Note
Please refer to your Ethernet device User’s
Manual for the device’s set up information.
3.4 Chassis Installation and Rack Mounting
To install the VDSL2 Converter in a 10-inch or 19-inch
Converter Chassis with standard rack, follow the instructions
described below.
Step 1: Place your VC-201/VC-202 on a hard at surface,
with the front panel positioned towards your front
side.
Step 2: Carefully slide in the module until it is fully and
rmly tted into the slot of the converter chassis.